x-10

SEWAGE TREATMENT systems

Back

The water from the wash bay is typically made up by the presence of various types of pollutants, such as suspended solids, detergents, oils and hydrocarbons. For this reason, the treatment of such wastewater requires a series of filters to remove the pollutants.

HOW DOES IT WORK?

In the Light Filtration Tank X-10, the first treatment is a sand trap, where through gravity, a separation of all those compounds which have a specific weight, different to water, will sink. These include sand, mud, gravel. They will sink and accumulate at the bottom of the tank, whilst the lighter materials (oils, etc) float to the top. The outlet pipe sucks the water from the middle point of the separator tank, preventing any overflow of the separated pollutants at the top and the bottom of the tank.

The second filtration step is to remove oil and hydrocarbons. This is done due to the gravity separation and later with an absorption filter, able to intercept the oil and hydrocarbons from the water. After this, the recycled water is pumped into the final separator tank and is considered clean and ready to be used again to wash down other equipment.

It should be remembered that the drains must be carried out by competent and authorised companies, as this type of waste can be considered dangerous, and must be disposed of as such.

Sewage treatment system

Dirty water is pumped in to the separation tank
It collects most of the mud
Increase the filtering surface
The filters separate the oil from water and hydrocarbons
Water in the system is also replenished water from the mains, to cover any water lost
The booster pump delivers the new clean water to your pressure washer

Technical data

YOUR BEST PARTNER

FUTURE
IS COMING

CHOOSE YOUR PARTNER WISELY:

Choosing the right partner with sustainable solutions is essential to face the future.
By prioritising sustainability in your partnerships, you will position your organisation for long-term success and resilience in a rapidly changing world.